Search

Ambientale

Caso Applicativo (3)

  • White Paper. Different sieving methods for a variety of applications

    The determination and knowledge of the particle size distribution is an essential part of the quality control process for industrial products. Easy handling, low investment cost and high accuracy make sieve analysis one of the most frequently used procedures for measuring the particle size. This white paper gives an overview of the different sieving techniques and describes the necessary steps to ensure reliable results.
  • White Paper: Cryogenic Preparation of Sample Materials

    A solid sample material should always be sufficiently prepared by size reduction and homogenization before it is subjected to chemical or physical analysis. Care should be taken that the analysis sample fully represents the original material and that the sample preparation process is carried out reproducibly. Most sample materials can be reduced to the required analytical fineness at room temperature by choosing a mill with a suitable size reduction principle (impact, pressure, friction, shearing, cutting).
  • White Paper: Ultrafine Grinding with Laboratory Ball Mills

    How are nano particles produced? The “Bottom-Up” method synthesizes particles from atoms or molecules. The “Top-Down” method involves reducing the size of larger particles to nanoscale, for example with laboratory mills. Nano particles are produced by colloidal grinding which involves dispersion of the particles in liquid to neutralize the surface charges. Factors such as energy input and size reduction principle make ball mills the best choice for the production of nanoparticles.

Flyers (4)

Reports applicativi (14)

  • Determinazione delle micotossine nelle noci

    Macinazione preliminare e fine
  • Energia rinnovabile

    Residui di legno dalle lavorazioni forestali e dalla lavorazione del legno sono solitamente trasformati in trucioli di legno. Questi possono essere utilizzati in modo diverso, in base al tipo di legno, alla corteccia, all’umidità residua, ad esempio come materia prima per pannelli truciolari o come substrato per la coltivazione di funghi. La maggior parte, comunque, viene utilizzata per la produzione di energia. La qualità del legno cippato può variare notevolmente, a seconda della sua origine e condizione. Il commercio e l’industria sono interessati alla percentuale di materia secca e al potere calorifico del legno cippato, così come il valore del prezzo dipende dal contenuto di acqua nel prodotto. Con il risultato dell’analisi che rappresenta un importante fattore economico, anche la preparazione del campione in modo rappresentativo e riproducibile ottiene importanza
  • Mulino a taglienti SM 300 – Affinamento di un sistema di macinazione ben affermato

    I mulini a taglienti vengono utilizzati in diverse aree della preparazione dl campione alle analisi successive. Tipiche applicazioni includono la riduzione di combustibili da rifiuto, la macinazione di campioni di biomasse per ricerche nell’ambito delle energie rinnovabili, il controllo dei prodotti nell’abito delle normative RoHS and WEEE, o nel recupero dei materiali preziosi – la varietà di campione è notevole.
  • Preparazione del campione per la spettrometria in fluorescenza a raggi X

    Dal campione in polvere alla pastiglia
  • Separazione di grandi volumi di campione con AS 450 control

    L’analisi granulometrica di grandi quantità di materiali sfusi è di solito effettuata tramite vagliatura. Nella maggior parte dei setacci tori disponibili sul mercato la pila dei setacci è collocata su delle molle che oscillano verticalmente. Tuttavia, per distribuire più uniformemente il materiale sull’intera superfiche del setaccio, la così detta setacciatura con effetto 3D utilizzata sull’AS 450 control è il metodo più adatto. Essa è caratterizzata da un movimento circolare sovrapposto a uno verticale e in questo modo il materiale è movimentato su tutto il setaccio. 
  • Setacciatura di polveri agglomerate con il setacciatore a getto d’aria AS 200 jeting machine AS 200 jet

    Il setacciatore a getto d’aria viene utilizzato principalmente per la setacciatura di materiali secchi con particelle di dimensioni inferiori ai 40 micron. Può comunque essere un’alternativa rapida alla classica setacciatura fino a 250 micron.
  • Silicio per l’energia solare

    I semiconduttori sono utilizzati per una grande varietà di applicazioni elettroniche, come circuiti integrati (microprocessori, microcontrollori, ecc.) rilevatori ottici e sorgenti di radiazioni (es. emettitori di luce), ma in modo particolare per i fotovoltaici, tramite i quali l’energia solare viene trasformata in potenza elettrica. Per la maggior parte delle applicazioni, il silicio è il materiale semiconduttore scelto.
  • Utilizzo del Cryomill per campioni con componenti volatili

    Per la riduzione di dimensioni di molti materiali è consigliabile utilizzare un mulino criogenico invece di un mulino che opera a temperature ambiente. Il campione viene infragilito con l'azoto liquido che migliora il suo comportamento di rottura quando viene sottoposto a impatto, pressione e attrito. Inoltre, in questo modo vengono conservati i componenti volatili del campione. Il mulino Cryomill non solo è il mulino criogenico più sicuro e moderno sul mercato ma fornisce anche eccellenti risultati di macinazione.
  • Air Jet Sieving of Bulk Materials

    Particle size analysis and particle size distribution are important criteria for the quality control of bulk materials. In a running production process, the results of a quality check must be available quickly to allow for immediate adjustment of the production parameters. Depending on the expected particle size and sample volume, different sieving methods and sieving machines are suitable for analysis. The method used for particle size analysis is primarily determined by the fineness of the material to be sieved. For dry sieving of samples with particle sizes below 40 microns, air jet sieving is the method of choice.
  • Mixer Mill MM 400: Upgrade of a True Multipurpose Mill

    With the Mixer Mill MM 400 RETSCH has developed a true multipurpose mill which covers a huge range of applications, including classic mixing and homogenization but also more complex tasks like cell disruption via bead beating or mechanochemical processes. The ease of use of mixer mills in general, combined with a wealth of accessories make the MM 400 the perfect choice for quick, safe and reproducible processing of small sample volumes.
  • Representative results require adequate sample preparation

    The following situation is typical for many production plants: After a routine quality check, the production process is stopped or an already produced batch is suspended, because the analysis results were not within the relevant critical values. But does the tested product really deviate from the specifications? It is often not the product itself which causes irregular analysis results but a lack of understanding of the steps which come before the analysis.
  • Sample Division of Large Volumes

    Representative sampling of large sample volumes is an integral part of the physical and chemical analysis of bulk goods and has a decisive influence on the quality of the results. Extraction of a sample from the bulk is not always carried out in a way to ensure representativeness. This is a widespread flaw in the quality control process with a negative impact on the subsequent analysis results. RETSCH provides some convenient solutions which help to improve working conditions and thereby the quality of the sampling process.
  • Separation of large sample volumes with the AS 450 control

    Particle analysis of large quantities of bulk goods is usually done by vibratory sieving. In most vibratory sieve shakers in the market the sieve stack is mounted on springs which oscillate vertically. However, to evenly distribute the material over the entire sieve surface, the so called 3D vibratory sieving as it is used in the AS 450 control is the most suitable method.
  • The New Planetary Ball Mill PM 300

    Planetary ball mills meet and exceed all requirements for fast and reproducible grinding to analytical fineness. They are used for the most demanding tasks in the laboratory, from routine sample processing to colloidal grinding and advanced materials development. With the new PM 300 RETSCH has developed a powerful tool which offers high sample throughput combined with ease-of-use.

Referenze (7)

Test Reports (75)